Documentation

Accessibility for the Visually Impaired

Win4Yaesu Suite for the for the FTDX-1200, 3000, 5000, 9000 and FT-991 User Manual

Win4YaesuSuite manual in German (Thank you Christian Ziem)

3rd Party Connectivity: Software and Hardware

How to Migrate to New Yaesu Firmware with Win4Yaesu

Installation and Release Notes: Version 1.444 (April 12, 2024)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10, 11 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New:  Added a nag screen to remind people about the FT240-31 ferrite!!!
  • Updated
    • It is no longer necessary to avoid special characters in the ClubLog password.
    • Some systems that were missing a voice in Microsoft Speech were giving an error.

Installation and Release Notes: Version 1.442 (March 25, 2024)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10, 11 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New:  Added support for the SDRPlay RSP 1B
  • Updated
    • Updated the EiBi shortwave database
    • Added spectral smoothing
    • Some of the menu items were no updating correctly when changed.
    • Clicking on 60m will now change to the 60m band and not require using the drop down.

Installation and Release Notes: Version 1.440 (January 12, 2024)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10, 11 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Updated
    • Updated the EiBi shortwave database
    • Added the manual tune macro
    • QSY for VFO B was not working when configured for CWSkimmer.  This has now been corrected.

Installation and Release Notes: Version 1.436 (October 5, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10, 11 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Updated
    • Updated the EiBi shortwave database
    • The virtual radios have been updated to work with the latest HamLib Library for all supported radios.  Note that many applications do not necessarily include the updated HamLib libraries.  These can be download here: https://hamlib.github.io/ .  Note that after download, you should copy the file libhamlib-4.dll into the appropriate folder of the application you are using.  For example, for WSJT, this is the bin folder.

Installation and Release Notes: Version 1.434 (August 5, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10, 11 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • There is a new HRD Logbook interface that no longer requires any pre-configuration.
  • Updated
    • Updated the EiBi shortwave database
    • The settings window will now save its previous location
    • Added timeouts to the ClubLog cluster connections
    • The Spectrum peaks checkbox now persists through restarts
    • There is a new HRD Logbook interface that no longer requires any pre-configuration.

Installation and Release Notes: Version 1.432 (July 16, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10, 11 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Added the Gen band button.  This button can be assigned to any frequency over 54MHz so that you can have quick access to the 70MHz band for example.  To use this, tune the radio to over 70 Mhz and press the button.  You can do this 3 times, selecting 3 different band segments usi9ng the band stacking of the radio.
  • Updated
    • The import and export of the frequency memories did not work correctly for a region outside North America.
    • Updated the spectrum peak checkbox to delete previous peak history when unselected.

Installation and Release Notes: Version 1.430 (June 9, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10, 11 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Added a High SWR indication in the transmit pane.  To clear it just click the indicator.  This alert comes form the radio so there can be a small delay before it appears.
    • Added the Speech speed function for the built in voice synthesis.
  • Updated
    • The VFO B frequency was not changing with the mouse wheel when a digit was clicked.
    • Scan buttons in the Frequency Memories did not change color on a cancel of the scan
    • The Frequency Memories window did not hold its position on reopening.

Installation and Release Notes: Version 1.420 (April 28, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Updated
    • There was an issue with the ALC meter for the FT-710
    • Logging with the terminal always put CW as the mode in the log.
    • Added the Control Shift E keystroke to bring up a direct frequency entry form for the visually impaired.
    • The ST command was missing in the virtual radios for the FTDX101
    • Included the latest SDRPlay API dll.  You should install the latest release of SDRUno if you use it.
    • Improved Hamlib compatibility.  

Installation and Release Notes: Version 1.418 (March 13, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Updated
    • There was an issue with the FT-710 where due to a firmware bug, CW transmission was interrupted and there were erratic meter readings.

Installation and Release Notes: Version 1.416 (March 11, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New:
  • Updated
    • Spectrum averaging did not hold the settings.
    • Modified the code to get around the constant struggle with Silicon Labs drivers where they just decide to drop certain .NET serial port functions!
    • Fixed the speech synthesis function to not announce settings when the software is first installed.

Installation and Release Notes: Version 1.414 (January 23, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New:
    • This release has a major update for the visually impaired.  The main (not mini screen) now has full voice synthesis as well as the CW messages and frequency memory screen.  Please read the document about this here: Accessibility for the visually impaired
  • Updated
    • The EiBi shortwave database has been updated
    • There is now an indicator showing the active VFO for the FT710
    • When changing VFO’s on the FTDX10, the band and filters did not update correctly.

Installation and Release Notes: Version 1.410 (January 3, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Updated:
    • Some computers could have errors with certain drivers other than the Yaesu driver.  It is best to use the Yaesu drivers.  This release checks closely for the related errors and in some cases corrects for them.
    • There were duplicate comports in the settings menu.  This has been resolved.

Installation and Release Notes: Version 1.406 (December 16, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • The FT-710 AESS is now supported.  Be aware however, that many other packages do not yet support this model and there are some significant changes to the CAT commands.  If you use the 3rd party virtual radios in Win4Yaesu, then try to use the FT-991A as a rig.

Installation and Release Notes: Version 1.404 (October 12, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Some of the supported Yaesu radios operate in Auto-information mode with Win4Yaesu.  The consequence is if you use a Y comport splitting cable for some amplifiers, then they could time-out.  This has been rectified by periodically sending an IF; command to the radio.

Installation and Release Notes: Version 1.402 (October 2, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Improved
    • This release improves the SDRPlay averaging.  You may need to change it from the current value after installation.

Installation and Release Notes: Version 1.398 (July 31, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Fixed
    • Due to firmware issues in the WinKey, the CW speed was not always correctly set.  This has been corrected.
    • The CW Speed slider was altering the CW Pitch settings in some cases.

Installation and Release Notes: Version 1.396 (June 8, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Updated the EiBi Shortwave Database
  • Fixed
    • Fixed some number format issues with the Spectrum Scope for users in Europe and Asia.

Installation and Release Notes: Version 1.394 (April 16, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Added support for the Elecraft K-POD Jog wheel controller.  To enable this, please look in the Tools, Settings, Keyboard and controllers section. Will require a restart.
    • Updated the EiBi Shortwave Database
  • Fixed
    • Fixed a situation where the radio was not turning off when closed and the option was selected in the User Preferences.

Installation and Release Notes: Version 1.392 (March 3, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Updated the EiBi Shortwave Database
  • Fixed
    • When the equalizer was set for a value of 0 in the Q Factor, is was not possible to open the equalizers. This was dues to a documentation bug in the programming manual.

Installation and Release Notes: Version 1.390 (February 19, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Updated the EiBi Shortwave Database
  • Fixed
    • Use of a Jog / Shuttle wheel like the Contour express has been improved and now works on all radios.  If you use the free AutoHotKey program you can keep Win4 in focus.
    • Fixed an issue with one of the menu pages in the Radio Menu Items for the FTDX10

Installation and Release Notes: Version 1.388 (January 20, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Updated the EiBi Shortwave Database
  • Fixed
    • The Contour / APF functions of the FTDX10 were reworked.  However, if one switches to VFO B, when you switch modes the values may be incorrect.  There is not much I can do about this due to some major bugs in the firmware. 

Accessibility for the Visually Impaired

Win4Yaesu Suite for the for the FTDX-1200, 3000, 5000, 9000 and FT-991 User Manual

3rd Party Connectivity: Software and Hardware

How to Migrate to New Yaesu Firmware with Win4Yaesu

Installation and Release Notes: Version 1.430 (June 9, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10, 11 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Added a High SWR indication in the transmit pane.  To clear it just click the indicator.  This alert comes form the radio so there can be a small delay before it appears.
    • Added the Speech speed function for the built in voice synthesis.
  • Updated
    • The VFO B frequency was not changing with the mouse wheel when a digit was clicked.
    • Scan buttons in the Frequency Memories did not change color on a cancel of the scan
    • The Frequency Memories window did not hold its position on reopening.

Installation and Release Notes: Version 1.420 (April 28, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Updated
    • There was an issue with the ALC meter for the FT-710
    • Logging with the terminal always put CW as the mode in the log.
    • Added the Control Shift E keystroke to bring up a direct frequency entry form for the visually impaired.
    • The ST command was missing in the virtual radios for the FTDX101
    • Included the latest SDRPlay API dll.  You should install the latest release of SDRUno if you use it.
    • Improved Hamlib compatibility.  

Installation and Release Notes: Version 1.418 (March 13, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Updated
    • There was an issue with the FT-710 where due to a firmware bug, CW transmission was interrupted and there were erratic meter readings.

Installation and Release Notes: Version 1.416 (March 11, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New:
  • Updated
    • Spectrum averaging did not hold the settings.
    • Modified the code to get around the constant struggle with Silicon Labs drivers where they just decide to drop certain .NET serial port functions!
    • Fixed the speech synthesis function to not announce settings when the software is first installed.

Installation and Release Notes: Version 1.414 (January 23, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New:
    • This release has a major update for the visually impaired.  The main (not mini screen) now has full voice synthesis as well as the CW messages and frequency memory screen.  Please read the document about this here: Accessibility for the visually impaired
  • Updated
    • The EiBi shortwave database has been updated
    • There is now an indicator showing the active VFO for the FT710
    • When changing VFO’s on the FTDX10, the band and filters did not update correctly.

Installation and Release Notes: Version 1.410 (January 3, 2023)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Updated:
    • Some computers could have errors with certain drivers other than the Yaesu driver.  It is best to use the Yaesu drivers.  This release checks closely for the related errors and in some cases corrects for them.
    • There were duplicate comports in the settings menu.  This has been resolved.

Installation and Release Notes: Version 1.406 (December 16, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • The FT-710 AESS is now supported.  Be aware however, that many other packages do not yet support this model and there are some significant changes to the CAT commands.  If you use the 3rd party virtual radios in Win4Yaesu, then try to use the FT-991A as a rig.

Installation and Release Notes: Version 1.404 (October 12, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Some of the supported Yaesu radios operate in Auto-information mode with Win4Yaesu.  The consequence is if you use a Y comport splitting cable for some amplifiers, then they could time-out.  This has been rectified by periodically sending an IF; command to the radio.

Installation and Release Notes: Version 1.402 (October 2, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Improved
    • This release improves the SDRPlay averaging.  You may need to change it from the current value after installation.

Installation and Release Notes: Version 1.398 (July 31, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • Fixed
    • Due to firmware issues in the WinKey, the CW speed was not always correctly set.  This has been corrected.
    • The CW Speed slider was altering the CW Pitch settings in some cases.

Installation and Release Notes: Version 1.396 (June 8, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Updated the EiBi Shortwave Database
  • Fixed
    • Fixed some number format issues with the Spectrum Scope for users in Europe and Asia.

Installation and Release Notes: Version 1.394 (April 16, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Added support for the Elecraft K-POD Jog wheel controller.  To enable this, please look in the Tools, Settings, Keyboard and controllers section. Will require a restart.
    • Updated the EiBi Shortwave Database
  • Fixed
    • Fixed a situation where the radio was not turning off when closed and the option was selected in the User Preferences.

Installation and Release Notes: Version 1.392 (March 3, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Updated the EiBi Shortwave Database
  • Fixed
    • When the equalizer was set for a value of 0 in the Q Factor, is was not possible to open the equalizers. This was dues to a documentation bug in the programming manual.

Installation and Release Notes: Version 1.390 (February 19, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Updated the EiBi Shortwave Database
  • Fixed
    • Use of a Jog / Shuttle wheel like the Contour express has been improved and now works on all radios.  If you use the free AutoHotKey program you can keep Win4 in focus.
    • Fixed an issue with one of the menu pages in the Radio Menu Items for the FTDX10

Installation and Release Notes: Version 1.388 (January 20, 2022)

Installation:  Please just click on the downloaded file. It will install in a new folder.  When you are happy you can uninstall the old version using the Windows control panel.  It is best if you temporarily disable any antivirus software. You can check the software at VirusTotal.com if you wish.

This release requires .NET 4.6 or later. In most cases this will already be installed if you allow Windows Update on Windows 10 and Windows 7 and 8. However if not, when you start the install, Windows will automatically download and install the latest release of .NET.  It will then reboot your computer.

If your computer was rebooted, you will need to run the installation of Win4Yaesu again.   That will install the program as usual.

If you are using an AMD system, please logoff and logon after the installation.  You can uninstall previous releases at any time using the Windows control panel.

Important Note: Both the FTDX101D/MP and FTDX10 require the use of the USB port and NOT the RS232.  Yaesu has removed certain functionality from the RS232 port.  In addition, ALL Yaesu radios require external hardware to display a spectrum.  None of their radios will provide this without it.

  • New
    • Updated the EiBi Shortwave Database
  • Fixed
    • The Contour / APF functions of the FTDX10 were reworked.  However, if one switches to VFO B, when you switch modes the values may be incorrect.  There is not much I can do about this due to some major bugs in the firmware.